You can unregister a Blink camera without account access by using the physical reset button on the device itself
If you have lost access to your Blink account, forgotten your password, or no longer have the email address associated with it, you do not need to log in to remove a camera from the system. The camera has a physical reset mechanism that erases its connection to any account and returns it to factory settings. This takes about 20 seconds and requires only the camera and a small tool to press the reset button.
The reset process works the same way regardless of why you cannot access your account. Once the camera is reset, it will no longer be registered to anyone and can be set up fresh by a new owner or stored for later use.
Key Takeaways
- Every Blink camera has a physical reset button that removes it from any account without needing to log in.
- The reset button is recessed and requires a paperclip, pin, or similar tool to press — it cannot be activated by hand.
- Hold the reset button for 10 to 15 seconds until the light on the camera blinks amber or red, then release.
- After reset, the camera will show no network connection and can be registered to a new account or left unregistered.
Locating the reset button on your camera
The reset button location varies slightly by Blink model. On the Blink Indoor and Blink Outdoor cameras, the reset button is a small recessed hole on the back or bottom of the device. On the Blink Mini, it is also on the back. On the Blink Video Doorbell, the reset button is inside the battery compartment on the back of the unit.
You will need a tool with a thin, pointed end to reach into the recessed hole. A paperclip straightened partway, a ballpoint pen with the tip retracted, or a small safety pin all work. Do not use anything that could damage the device, such as a sharp knife or needle that might slip and scratch the camera body.
The reset process step by step
Power on the camera if it is not already running. For battery-powered models, this means the batteries are installed. For wired models like the Video Doorbell, the device draws power from your home's electrical system.
Insert your tool into the reset button hole and press firmly. You should feel a small click or resistance as the button depresses. Hold it down for 10 to 15 seconds without releasing. During this time, watch the light indicator on the camera. It will typically blink amber or red to show the reset is in progress.
Release the button after 15 seconds. The camera will restart, and the light will change color — usually to blue or white — to show it has completed the reset. This means the device is no longer registered to any account and has returned to its original factory state.
What happens after the reset is complete
Once reset, the camera will not connect to any network or account. If you open the Blink app on your phone, the camera will no longer appear in your device list. If someone else tries to log into their Blink account, they will not see this camera either.
The camera is now ready to be set up again from scratch. To do this, you or anyone else would need to open the Blink app, create or log into an account, and add the camera as a new device by scanning its setup code or entering its serial number. Until someone does that, the camera remains unregistered and inactive.
If the reset button does not respond
If you press the reset button and the light does not change after 15 seconds, the camera may not have power. Check that batteries are installed correctly (positive and negative ends aligned) or that a wired camera is plugged in and receiving power. Try again after confirming power is present.
If the camera still does not respond, the device may be faulty. In that case, you can contact Blink support with proof of purchase to discuss repair or replacement options. You will not need account access to do this — you can explain that you have lost access to the account and want to address the hardware issue.
Removing the camera from your account if you still have access
If you can still log into your Blink account but straightforward want to remove the camera without resetting it, you can do this through the app. Open the Blink app, select the camera, go to Settings, and choose Remove Device or Delete Camera. This removes it from your account but does not reset the device itself — it will still be registered to your account in Blink's system until the account is deleted or the camera is physically reset.
Using the app method is cleaner if you still have account access because it notifies Blink's servers that the camera is no longer yours. The physical reset is the only option when you cannot log in.
Frequently Asked Questions
Will resetting the camera delete any recorded footage?
The reset button does not delete footage stored in the cloud. Any video recorded before the reset remains in your Blink account's cloud storage. If you want to delete that footage, you will need to log into your account through the Blink app or website and remove it manually from your video history.
Can I reset a camera that is not mine?
Yes, physically. If you have the camera in your hands, you can press the reset button. However, resetting a camera you do not own without permission is not recommended. If you have inherited a camera or received one from someone, ask the previous owner to remove it from their account first, or contact Blink support with proof that you now own the device.
What if I reset the camera but still see it in my account?
After a physical reset, the camera should disappear from your account within a few minutes as the device loses connection. If it remains visible in the app after 10 minutes, try logging out of the app and logging back in to refresh the device list. If it still appears, you may need to manually remove it through the app's settings menu.
Does resetting the camera affect my Wi-Fi network?
No. The reset only affects the camera itself. Your Wi-Fi network will continue to work normally, and other devices connected to it will not be affected. The camera will straightforward stop trying to connect to your network.